EZ LYNK AutoAgent 2 Installation Guide

EZ LYNK’s AutoAgent and AutoAgent 2 are universal vehicle communication devices that allow you to diagnose, monitor, and program your vehicle. They use cloud based technology to allow you and your mechanic/technician to communicate or transmit data in real-time.

Installation Steps

Living up to the brand name, EZ LYNK has made the installation process simple. We’ve broken down each step and provided some valuable information that will help you understand how your AutoAgent works.

  1. Step #1

    Download & Install the AutoAgent App

    The AutoAgent app is available for most mobile devices. It may require that your mobile device has been updated to the most recent operating system.

  2. Step #2

    Create an Account

    Create an AutoAgent App accountFrom the AutoAgent app, select ‘create an account’. You will need to verify that your email address is valid upon creation.

    Dealers should always create an account for the end-user or use the account that the end-user has already created.

  3. Step #3

    Place Your Key in the ‘Run’ Position

    Turn your key all the way over without starting the vehicle. This will boot your vehicle’s engine computer allowing the AutoAgent to communicate with it. If you have a push-to-start vehicle, you should press the Start button twice.
  4. Step #4

    Plug the AutoAgent into your OBD-II Port

    With the key in the ‘Run’ position, plug your AutoAgent into your vehicle’s On Board Diagnostics II port. You can verify that it has booted correctly when you see that a blue and green light are illuminating from the device.
  5. Step #5

    Connect to your AutoAgent via WiFi or Bluetooth

    Navigate to the WiFi settings of your mobile device and select the ‘EZLYNK_####’ network. A check mark will appear next to the network name when you have successfully connected. The AutoAgent 2 also allows you to connect via Bluetooth.
  6. Step #6

    Open the App & Lynk your Vehicle

    After you’ve successfully connected, you can navigate back to the AutoAgent app. You should now be able to see your vehicle gauges.

    Most of the time your vehicle will be ‘AutoLynked’. If your mobile device has access to the internet, you will notice that a message appeares asking you to lynk your vehicle. Follow the prompts to connect your vehicle with your technician or tuner.

  7. Step #7

    Tune your Vehicle

    After your vehicle has been lynked, you’re ready to install your tuning.

    Navigate to Vehicle > ECU Profiles. Here you can view the list of tunes that are available to you.

    Tap the button to download your desired tune, then select ‘Install’ to complete the programming steps.

Need Help? Visit our Help Center to explore solutions that some of our other users have run into or Create A Ticket to work directly with one of our technical support specialists.

Help Us Save Racing

Send a message to your US Senators and Representatives in support of the RPM Act.

Save Racing!

Redefining The Limits

12+

Years Tuning

200,000+

Vehicles Tuned

2 Million+

HP Gained

10,000+

Dyno Tests

30+

Countries