EZ LYNK Custom Tuning Support Pack

Maximize your vehicle’s potential with cloud based tuning via the EZ LYNK AutoAgent. Complete control is at your fingertips through the AutoAgent mobile app available for Android and iOS. AutoAgent not included.

In Stock

SKU: EZ-SUPP-PK Category:
LML Tunes Powerstroke Tunes Cummins Tunes Titan XD Tunes
Emissions Present Tuning Off Road Race Tuning

Emissions Present DST This tune will program your factory/emissions compliant LML with Driver Selectable Tuning power levels consisting of +15HP, +30HP, +60HP, +100HP, and +150HP. The "DST Switch" must be installed in order for this tune to operate properly. All power levels are intended and designed for use with your factory engine components. This tune may NOT be used with aftermarket exhaust installed.

Emissions Present Single Tune This tune will program your factory/emissions compliant LML with the horsepower level listed in the tune name. This tune is to be used on a "stock" vehicle with emissions present. This tune may NOT be used with aftermarket exhaust installed. If you have an DST switch installed, it will not function with this tune installed.

Emissions Removed DST This tune will program your emissions removed LML with Driver Selectable Tuning power levels consisting of +30HP, +60HP, +100HP, +150HP, and +200HP. The "DST Switch" must be installed in order for this tune to operate properly. This tune and all of its power levels are intended and designed for use with your factory engine components. This tune is available for off road use only.* Aftermarket exhaust MUST be installed and EGR/throttle valve MUST be disconnected or removed completely.

Emissions Removed DST LBF This tune incorporates Low Boost Fueling which will increase fueling resulting in more low-end power. It will program your emissions removed LML with Driver Selectable Tuning power levels consisting of +30HP, +60HP, +100HP, +150HP, +200HP. The "DST Switch" must be installed in order for this tune to operate properly. This tune and all of its power levels are intended and designed for use with your factory engine components. This tune is available for off road use only.* Aftermarket exhaust MUST be installed and EGR/throttle valve MUST be disconnected or removed completely.

Emissions Removed Single Tune This tune will program your emissions removed LML with the indicated horsepower in the tune name. This tune is intended and designed for use with your factory engine components. This tune is available for off road use only.* Aftermarket exhaust MUST be installed and EGR/throttle valve MUST be disconnected or removed completely. If you have an DST switch installed, it will not function with this tune installed.

CP3 Conv. DSTThis tune will program your truck with the proper calibration for your CP3 injection pump conversion. This tune is intended and designed for use with standard CP3 injection pumps/sportsman pumps/CP3 pumps. This tune is intended for use with the stock turbo and stock injectors. DST Power levels consist of +30HP, +60HP, +100HP, +150HP, +200HP. With this setup you will be capable of attaining slightly more power than with your factory CP4 injection pump, but will still be limited by the stock turbo below 550RWP.

CP3 Conv. 10mm DSTThis tune will program your truck with the proper calibration for your CP3 injection pump conversion. This tune is intended and designed for use with a 10mm CP3 Stroker Pump/Powerflo 750 This tune is intended for use with the stock turbo and stock injectors. DST Power levels consist of +30HP, +60HP, +100HP, +150HP, +200HP. With this setup you will be capable of attaining slightly more power than with your factory CP4 injection pump, but will still be limited by the stock turbo and stock injectors and will typically remain below 550RWP until further modification.

CP3 Conv. 10mm A Turbo DSTThis tune is intended and designed for use with a 10mm CP3 Stroker Pump/Powerflo 750 and an aftermarket turbo charger, and stock injectors. DST Power levels will be determined by the components limitations.

CP3 Conv. 10mm CTurbo DSTThis tune is intended and designed for use with a 10mm CP3 Stroker Pump/Powerflo 750 and a compound turbo setup, and stock injectors. DST Power levels will be determined by the components limitations. This tune may need adjustments depending upon modifications.

CP3 Conv. CTurbo DSTThis tune will program your truck with the proper calibration for your CP3 injection pump conversion and compound turbo setup. This tune is intended and designed for use with standard CP3 injection pumps/sportsman pumps/CP3 pumps and an atmospheric turbo over the stock or larger VVT/VGT in the valley.

2011 - 2014

Emissions Present DST This tune will program your factory/emissions compliant Powerstroke with Driver Selectable Tuning power levels consisting of +15HP, +30HP, +60HP, +100HP, +150HP. The "DST Switch" must be installed in order for this tune to operate properly. All power levels are intended and designed for use with your factory engine components. This tune may NOT be used with aftermarket exhaust installed.

Emissions Present Single Tune This tune will program your factory/emissions compliant Powerstroke with the indicated horsepower listed in the tune name. This tune is to be used on a "stock" vehicle with emissions present. This tune may NOT be used with aftermarket exhaust installed. If you have an DST switch installed, it will not function with this tune installed.

Emissions Removed DST This tune will program your emissions removed Powerstroke with Driver Selectable Tuning power levels consisting of 30HP, +60HP, +100HP, +150HP, and +180HP. The "DST Switch" must be installed in order for this tune to operate properly. This tune and all of its power levels are intended and designed for use with your factory engine components. This tune is available for off road use only.* Aftermarket exhaust MUST be installed and EGR/throttle valve MUST be disconnected or removed completely.

Emissions Removed DST LBF This tune incorporates Low Boost Fueling which will increase fueling resulting in more low end power. It will program your emissions removed Powerstroke with Driver Selectable Tuning power levels consisting of 30HP, +60HP, +100HP, +150HP, and +180HP. The "DST Switch" must be installed in order for this tune to operate properly. This tune and all of its power levels are intended and designed for use with your factory engine components.This tune is available for off road use only.* Aftermarket exhaust MUST be installed and EGR/throttle valve MUST be disconnected or removed completely. This tune will also be suitable for trucks that are also fitted with upgraded CP4 injection pumps.

Emissions Removed Single Tune This tune will program your emissions removed Powerstroke with the indicated horsepower in the tune name. This tune is intended and designed for use with your factory engine components.This tune is available for off road use only.* Aftermarket exhaust MUST be installed and EGR/throttle valve MUST be disconnected or removed completely. If you have an DST switch installed, it will not function with this tune installed.

FTurbo DST This tune is intended and designed for use with an aftermarket turbo charger Larger VVT/VGT or Non-VGT or compound turbo setup, and stock injectors. This tune will also be suitable for trucks that are also fitted with a 15 CP4 injection pump or upgraded/stroker CP4. Depending on setup, further modification may be necessary. DST Power levels will be determined by the components limitations.

DFuel FTurbo This tune is intended and designed for use with a dual injection pump setup and aftermarket turbo charger Larger VVT/VGT or Non-VGT or compound turbo setup. Depending on setup, further modification may be necessary. DST Power levels/output will be determined by the components and their limitations. If this tune is loaded/installed on a vehicle without dual injection pumps, the vehicle will not start.

15 Turbo This tune is intended and designed for use with a 2015+ model Powerstroke factory turbo charger and stock injectors.&nsbp;DST Power levels will generally be comparable to the standard 30HP, +60HP, +100HP, +150HP, and +180HP as the power increase will still be limited by the factory CP4 injection pump. This tune will also be suitable for trucks that are also fitted with upgraded CP4 injection pumps.

2015 - 2016

Emissions Present DSTThis tune will program your factory/emissions compliant Powerstroke with Driver Selectable Tuning power levels consisting of +15HP, +30HP, +60HP, +100HP, and +150HP. The "DST Switch" must be installed in order for this tune to operate properly. All power levels are intended and designed for use with your factory engine components.This tune may NOT be used with aftermarket exhaust installed.

Emissions Present Single TuneThis tune will program your factory/emissions compliant Powerstroke with the indicated horsepower listed in the tune name. This tune is to be used on a "stock" vehicle with emissions present. This tune may NOT be used with aftermarket exhaust installed.If you have an DST switch installed, it will not function with this tune installed.

Emissions Removed DSTThis tune will program your emissions removed Powerstroke with Driver Selectable Tuning power levels consisting of +30HP, +60HP, +100HP, +150HP, and +200HP. The "DST Switch" must be installed in order for this tune to operate properly. This tune and all of its power levels are intended and designed for use with your factory engine components.This tune is available for off road use only.* Aftermarket exhaust MUST be installed and EGR/throttle valve MUST be disconnected or removed completely.

Emissions removed DST LBFThis tune incorporates Low Boost Fueling which will increase fueling resulting in more low end power. It will program your emissions removed Powerstroke with Driver Selectable Tuning power levels consisting of +30HP, +60HP, +100HP, +150HP, and +230HP. The "DST Switch" must be installed in order for this tune to operate properly. This tune and all of its power levels are intended and designed for use with your factory engine components.This tune is available for off road use only.* Aftermarket exhaust MUST be installed and EGR/throttle valve MUST be disconnected or removed completely. This tune will also be suitable for trucks that are also fitted with upgraded cp4 injection pumps.

Emissions Removed Single TuneThis tune will program your emissions removed Powerstroke with the indicated horsepower in the tune name. This tune is intended and designed for use with your factory engine components.This tune is available for off road use only.* Aftermarket exhaust MUST be installed and EGR/throttle valve MUST be disconnected or removed completely. If you have an DST switch installed, it will not function with this tune installed.

FTurbo DSTThis tune is intended and designed for use with an aftermarket turbo charger Larger VVT/VGT or Non-VGT or compound turbo setp, and stock injectors. This tune will also be suitable for trucks that are also fitted with an upgraded CP4 injection pump/stroker CP4. Depending on setup, further modification may be necessary.DST Power levels will be determined by the components limitations.

DFuel FTurboThis tune is intended and designed for use with a dual injection pump setup and aftermarket turbo charger Larger VVT/VGT or Non-VGT or compound turbo setup.Depending on setup, further modification may be necessary. DST Power levels/output will be determined by the components and their limitations.If this tune is loaded/installed on a vehicle without dual injection pumps, the vehicle will not start.

2017

Emissions Present DSTThis tune will program your factory/emissions compliant Powerstroke with Driver Selectable Tuning power levels consisting of +15HP, +30HP, +60HP, +100HP, +150HP. The "DST Switch" must be installed in order for this tune to operate properly. All power levels are intended and designed for use with your factory engine components.This tune may NOT be used with Aftermarket exhaust installed.

Emissions Present Single TuneThis tune will program your factory/emissions compliant Powerstroke with the indicated horsepower listed in the tune name. This tune is to be used on a "stock" vehicle with emissions present.This tune may NOT be used with Aftermarket exhaust installed. If you have an DST switch installed, it will not function with this tune installed.

Emissions Removed DSTThis tune will program your emissions removed Powerstroke with Driver Selectable Tuning power levels consisting of +30HP, +60HP, +100HP, +150HP, +200HP. The "DST Switch" must be installed in order for this tune to operate properly. This tune and all of its power levels are intended and designed for use with your factory engine components.This tune is available for off road use only.* Aftermarket exhaust MUST be installed and EGR/throttle valve MUST be disconnected or removed completely.

Emissions Removed DST LBF This tune incorporates Low Boost Fueling which will increase fueling resulting in more low end power. It will program your emissions removed Powerstroke with Driver Selectable Tuning power levels consisting of +30HP, +60HP, +100HP, +150HP, and +230HP. The "DST Switch" must be installed in order for this tune to operate properly. This tune and all of its power levels are intended and designed for use with your factory engine components . This tune is available for off road use only.* Aftermarket exhaust MUST be installed and EGR/throttle valve MUST be disconnected or removed completely. This tune will also be suitable for trucks that are also fitted with upgraded cp4 injection pumps.

Emissions Removed Single TuneThis tune will program your emissions removed Powerstroke with the indicated horsepower in the tune name. This tune is intended and designed for use with your factory engine components.. This tune is available for off road use only.* Aftermarket exhaust MUST be installed and EGR/throttle valve MUST be disconnected or removed completely. If you have an DST switch installed, it will not function with this tune installed.

FTurbo DST This tune is intended and designed for use with an aftermarket turbo charger Larger VVT/VGT or Non-VGT or compound turbo setup, and stock injectors. This tune will also be suitable for trucks that are also fitted with an upgraded CP4 injection pump/stroker CP4. Depending on setup, further modification may be necessary. DST Power levels/output will be determined by the components and their limitations.

DFuel FTurbo This tune is intended and designed for use with a dual injection pump setup and aftermarket turbo charger Larger VVT/VGT or Non-VGT or compound turbo setup. Depending on setup, further modification may be necessary. DST Power levels/output will be determined by the components and their limitations. If this tune is loaded/installed on a vehicle without dual injection pumps, the vehicle will not start.

Nissan Titan Single Tune Emissions PresentThis Tune will program your Nissan Titan 5.0L Cummins equipped vehicle with the additional horsepower indicated in the the tune name.This tune tune is intended and designed to operate as emissions compliant.

Nissan Titan Single Tune Emissions RemovedThis Tune will program your Nissan Titan 5.0L Cummins equipped vehicle with the additional horsepower indicated in the the tune name. This tune is intended and designed for emissions equipment removed.This tune is available for off road use only.* Aftermarket exhaust must be installed and EGR/throttle valve must be disconnected in order for this tune to function properly.

Emissions Present DSTThis tune will program your factory/emissions compliant Cummins with Driver Selectable Tuning power levels consisting of +15HP, +30HP, +60HP, +100HP, +150HP. The "DST Switch" must be installed in order for this tune to operate properly. All power levels are intended and designed for use with your factory engine components.This tune may NOT be used with Aftermarket exhaust installed.

Emissions Present Single TuneThis tune will program your factory/emissions compliant Cummins with the indicated horsepower listed in the tune name. This tune is to be used on a "stock" vehicle with emissions present.This tune may NOT be used with Aftermarket exhaust installed. If you have an DST switch installed, it will not function with this tune installed.

Emissions Present Single Tune w/TCM This tune will program your emissions present Cummins with the indicated horsepower in the tune name and will also incorporate TCM tuning. The TCM portion of this tune will program the transmission with improved shift points, added line pressure, and torque converter lockup. this will ensure power is put to the ground more efficiently and will also allow the transmission to better support the power increase. Transmission line pressure in this tune is set at 225PSI. The trans will operate at 160-175 until the valve body is upgraded/trans is built. Line pressure, along with other parameters, can be adjusted per your trans builders request.This tune is intended and designed for use with your factory engine components .and is emissions compliant.

Emissions Removed DSTThis tune will program your emissions removed Cummins with Driver Selectable Tuning power levels consisting of +30HP, +60HP, +100HP, +150HP, and +180HP. The "DST Switch" must be installed in order for this tune to operate properly. This tune and all of its power levels are intended and designed for use with your factory engine components.This tune is available for off road use only.* Aftermarket exhaust MUST be installed and EGR/throttle valve MUST be disconnected or removed completely.

Emissions removed DST LBF This tune incorporates Low Boost Fueling which will increase fueling resulting in more low end power. It will program your emissions removed Powerstroke with Driver Selectable Tuning power levels consisting of +30HP, +60HP, +100HP, +150HP, and +180HP. The "DST Switch" must be installed in order for this tune to operate properly. This tune and all of its power levels are intended and designed for use with your factory engine components.This tune is available for off road use only.* Aftermarket exhaust MUST be installed and EGR/throttle valve MUST be disconnected or removed completely.

Emissions Removed DST w/TCMThis tune will program your emissions removed Cummins with Driver Selectable Tuning power levels consisting of +30HP, +60HP, +100HP, +150HP, and +180HP and will also incorporate TCM tuning. The TCM portion of this tune will program the transmission with improved shift points, added line pressure, and torque converter lockup. this will ensure power is put to the ground more efficiently and will also allow the transmission to better support the power increase. Transmission line pressure in this tune is set at 225PSI. The trans will operate at 160-175 until the valve body is upgraded/trans is built. Line pressure, along with other parameters, can be adjusted per your trans builders request. The "DST Switch" must be installed in order for this tune to operate properly. This tune and all of its power levels are intended and designed for use with your factory engine components.This tune is available for off road use only.* Aftermarket exhaust MUST be installed and EGR/throttle valve MUST be disconnected or removed completely.

Emissions Removed DST w/TCM LBFThis tune will program your emissions removed Cummins with Driver Selectable Tuning power levels consisting of +30HP, +60HP, +100HP, +150HP, and +180HP and will also incorporate TCM tuning as well as Low Boost Fueling which will increase fueling resulting in more low end power.The TCM portion of this tune will program the transmission with improved shift points, added line pressure, and torque converter lockup. this will ensure power is put to the ground more efficiently and will also allow the transmission to better support the power increase. Transmission line pressure in this tune is set at 225PSI. The trans will operate at 160-175 until the valve body is upgraded/trans is built. Line pressure, along with other parameters, can be adjusted per your trans builders request. The "DST Switch" must be installed in order for this tune to operate properly. This tune and all of its power levels are intended and designed for use with your factory engine components.This tune is available for off road use only.* Aftermarket exhaust MUST be installed and EGR/throttle valve MUST be disconnected or removed completely.

Emissions Removed Single TuneThis tune will program your emissions removed Cummins with the indicated horsepower in the tune name. This tune is intended and designed for use with your factory engine components.This tune is available for off road use only.* Aftermarket exhaust MUST be installed and EGR/throttle valve MUST be disconnected or removed completely. If you have an DST switch installed, it will not function with this tune installed.

Emissions Removed single tune w/TCMThis tune will program your emissions removed Cummins with the indicated horsepower in the tune name and will also incorporate TCM tuning. The TCM portion of this tune will program the transmission with improved shift points, added line pressure, and torque converter lockup. this will ensure power is put to the ground more efficiently and will also allow the transmission to better support the power increase. Transmission line pressure in this tune is set at 225PSI. The trans will operate at 160-175 until the valve body is upgraded/trans is built. Line pressure, along with other parameters, can be adjusted per your trans builders request. This tune is intended and designed for use with your factory engine components.This tune is available for off road use only.* Aftermarket exhaust MUST be installed and EGR/throttle valve MUST be disconnected or removed completely.

Additional information

Brand

,

Vehicle

, , , ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.